Extruded polystyrene: Extruded polystyrene (XPS) rigid foam is usually blue or pink in color, with a smooth plastic surface. XPS panels typically aren't faced with other material. The R-value is about R-5.

What is the R-value of rigid foam?

Rigid foam board insulation indeed has some of the best R-values of all insulation materials. Polyisocyanurate features an R-value up to 8.0, which other insulating materials cannot touch. Spray foam insulation, especially the closed-cell kind, has an R-value of 6.0 per inch, sometimes as high as 6.5.

What is the R-value of 1 inch foam board?

The polystyrene is expanded. Styrofoam insulation is the cheapest material. R-values can range from 3.6 to 4.2 per inch.

Which foam board has the highest R-value?

Polyisocyanurate: Known as polyiso for short, polyisocyanurate foam has the highest R-value per inch (R-6.5 to R-6.8) of any rigid insulation.

What is the difference between pink and blue foam board?

Both are manufactured using the same process and contain similar chemical components. The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company.

Why R-value is Important for Foam Board Insulation

Does rigid foam lose R-value?

A popular rigid insulation choice, XPS features an initial R-value of R-5 per inch. That said, the long term R-values of this foam board decline over time. For example, after just 5 years, an XPS board will see its R-value fall by 10%, and even more going forward.

How thick is r25 rigid insulation?

Extruded polystyrene or XPS (foam is usually pink or blue) XPS has an R-value of 5 per inch of thickness requiring 5" of insulation to achieve R-25. EPS has an R-value of approximately 4 per inch of thickness, requiring at least 6" of insulation to achieve R-25.

Does foam board insulation lose its R-value?

Insulation R-value is directly correlated to maximum energy efficiency in a building envelope; higher R-values translate into increased savings. In below grade applications, foam insulation is exposed to moisture and could lose R-value over time if this moisture is absorbed.

What is the R-value of 2 inches of closed cell foam?

R-Value In 2 Inches Of Spray Foam

The R-value ranges from R-3.5 to R-3.6 per inch. The filling of a 2×4 cavity yields about an R-13.

What is the R-value of 3/4 inch STYROFOAM?

STYROFOAM extruded polystyrene insulation is rated at an R-value of 5.0 per inch at 75°F.

Does foam board insulation need a vapor barrier?

Foam insulation usually does not require a vapor barrier. For some foam insulation types, such as closed-cell spray foam and foam board insulation, the insulation itself stops the movement of most water vapor.

What insulation has the highest R-value per inch?

Vacuum insulated panels have the highest R-value, approximately R-45 (in U.S. units) per inch; aerogel has the next highest R-value (about R-10 to R-30 per inch), followed by polyurethane (PUR) and phenolic foam insulations with R-7 per inch.

What is the R-value of R Tech InsulFoam?

InsulFoam EPS has R-values that vary depending on temperature and the density of the product installed. For instance, our standard R-TECH, sold in home improvement stores, has an average R-value of about 3.9 per inch at 75°F.

Which board is best for insulation?

Polyurethane (PUR) is one of the most efficient insulation materials on the market. PUR is available in the shape of insulation boards or foam. However, the boards have a better insulation value than the foam variant. Moreover, these boards guarantee a certain thickness in advance and nothing has to be taped over.

What is a good R-value?

Depending on where you live and the part of your home you're insulating (walls, crawlspace, attic, etc.), you'll need a different R-Value. Typical recommendations for exterior walls are R-13 to R-23, while R-30, R-38 and R-49 are common for ceilings and attic spaces.

How thick is r30 insulation?

8¼ ” thick, R-30C EcoTouch® Thermal Batt insulation prevents moisture damage and helps assure long roof life by providing 1" of ventilation air space between the insulation and roof deck. Easy Installation R-30C EcoTouch® Thermal Batt insulation is easy to handle and install.

What is the R-value of 2 inch blue Styrofoam?

A wall utilizing STYROFOAM T-MASS Technology with a 2-inch exterior layer and a 4-inch interior layer of concrete along with a 2-inch layer of STYROFOAM extruded polystyrene insulation would result in a material R-value of approximately 11.33.

What is the R-value of Dow blue board?

DuPont™ STYROFOAM™ Scoreboard Insulation Board (Blue Board) 4 ft by 8 ft Sheet, 1" Thick, R value 5.0 A nonstructural, rigid board insulation manufactured of Extruded Polystyrene Foam (XPS).

What is the R-value of blue Styrofoam insulation?

Extruded polystyrene foam (XPS) also known as blue board or pink board comes in many different thicknesses and edge profiles. This insulation board is probably one of the most widely used foam board insulation products in the residential construction industry. XPS has an R value of 4.5 to 5.0 per inch of thickness.

What is the thinnest insulation with highest R-value?

Thermablok® Aerogel is a revolutionary advancement in thermal technology offering the thinnest insulation available to prevent thermal and cold bridging. Classed as a Super Insulation, Aerogel has the highest insulation value of any known material with the lowest thermal conductivity value of any solid (0.015W/mK).

What is the highest R-value insulation for a 2x4 wall?

Fiberglass and rock wool batts—2x4 walls can hold R-13 or R-15 batts; 2x6 walls can have R-19 or R-21 products.