Hyundai is conducting a safety recall in the United States to replace the Electronic Power Steering (EPS) Control Module on certain 2011 Hyundai Sonata vehicles produced beginning on December 11, 2009 through October 31, 2010 manufactured at the Hyundai Motor Manufacturing Alabama. © 2022 Hyundai Motor America.

What does it mean when EPS light comes on?

What does the electric power steering system (EPS) Warning Light mean? The electric power steering system (EPS) Warning Light is located on the instrument panel. When the light is illuminated, it means that the EPS system is not functioning properly, and the vehicle should be serviced.

How do I fix the EPS problem in my car?

This issue with the EPS light can also be caused if you have recently had to jump-start your car, or you've disconnected the battery. Occasionally, the problem can be fixed by simply turning your vehicle off and on again.

Can I drive with EPS light on?

As long as you are not impeded by any negative side effects and you feel it is safe to steer your vehicle, you should be ok to continue driving your Hyundai until your appointment.

What does EPS light mean on a Hyundai Accent?

In hydraulic power steering systems, a leak in the system causing a low fluid level is the most common cause for this problem. In electronic power steering (EPS) systems, you may find an illuminated EPS light instead. As EPS systems do not use fluid to provide steering assistance, there are no fluid levels to check.

how to reset EPS light or HARD STEERING in hyundai i20 and verna.

How much does it cost to fix a car EPS?

Most repairs to the power steering fluid system cost between $500 and $650 to correct. But the exact price comes down to what exactly went wrong with the system. For example, if you just need to replace the hose, you only need to spend between $60 and $150 on parts and a little extra for labor.

Can you drive without EPS?

However, the good news is driving without electric power steering should not damage your car. If your power steering fails, you can still operate the steering wheel—at least enough to make it to the side of the road.

What causes EPS problems?

EPS outage can be caused by a car battery, an alternator or a circuit fault. Regular checkup should be provided for all those car elements.

Can EPS be repaired?

Product Description. Electronic Power Steering (EPS) Module Repair Service for all brands. We repair all EPS of all vehicles.

What causes electric power steering failure?

Today's electronic power steering systems may fail due to issues with the mounted electric motor. In particular, excessive heat on the motor is likely to cause the failure modes. Infiltration of the system environment by water, dirt, or other contaminants will also likely lead to EPS failure.

How do I reset my electric power steering?

The easiest way to reset that alert is to restart your car. Switch your entire car on and off. This will reset all the electrical components in your car. Repeat the process 2 or 3 times this will get rid of the power steering assist fault warning.

Can electric power steering be fixed?

This problem can be fixed on your own, but if you're not sure how to fix electric power steering problems, take it to a certified mechanic.

Does low battery affect electric power steering?

The power steering is an electrical system, so a problem with the battery could affect the power assistance. You should still be able to steer the car even without power assistance.

How do you diagnose EPS?

The main indication you'll get if there is a malfunction with the electric power steering system is that the EPS light will illuminate on the dashboard. Specifically, the warning light will come on when the EPS system is off.
...
When Driving, The Amount Of Assistive Torque Doesn't Decrease

1. Torque sensor.
2. Electric motor.
3. ECU.

How do you know when electric power steering is going bad?

Top 4 Signs of Power Steering Failure

1. Whining Noise When You Turn the Wheel. ...
2. Slow Responding or Stiff Steering Wheel. ...
3. Squealing Noise Upon Starting Your Vehicle. ...
4. Reddish Puddle Underneath Your Car.

Is it safe to drive a car when the power steering has failed?

Driving your car for extended periods without power steering fluid can damage the pump. While there's nothing that physically stops you from driving your car if you have a power steering fluid leak, once the level drops, your pump runs dry. This causes increased friction and heat and can quickly cause expensive damage.

Can I drive my car if the power steering goes out?

Vehicles that are designed with a power steering pump should only be used when the power steering is operational. When the power steering stops working, you should refrain from operating the vehicle until the pump is replaced.

Is it expensive to fix power steering?

The average cost to repair a power steering pump is somewhere between $200 and $350. To replace the power steering pump with a new part, it will cost between $400 and $800 (depending on car model and what shop you take it to).

How much does it cost to fix electronic power steering?

The Best in Auto Repair

The average cost for power steering control module replacement is between $865 and $895. Labor costs are estimated between $115 and $146 while parts are priced at $749. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location.

How much does power steering service cost?

Power steering pumps are essential to the operation of the car cars with power steering. The job can be costly: between $100-$200 for a new power steering pump if you DIY and around $500 to get it done by a mechanic. That said, it is not nearly as expensive as replacing your vehicle.

Does electric power steering have fluid?

Electric Power Steering or Motor-Driven Power Steering

This system eliminates hydraulics and pressurized fluid from the system.

Does electric steering fail?

Your car's electric power steering system is susceptible to failure over time if not properly maintained and/or repaired when issues arise.

Where is the EPS steering sensor located?

EPS is a relatively simple system. The steering shaft torque sensor, located in a section of torsion bar in between the steering input and output shafts, is the PSCM's main input for determining steering direction and the amount of assist needed.