Be careful not to use a pressure washer near the edges of the film.

1. Apply car wash soap using a clean microfiber mitt.
2. Soak hard-to-clean spots with soap for several minutes.
3. For extra tough spots, use 99% isopropyl alcohol or lacquer thinner.
4. Dry the coating with a microfiber towel.

Can Xpel go through car wash?

Can I run my car through an automatic car wash? Yes, but please wait at least 48 hours after installation to allow the film to dry completely.

Can I wash my car after PPF?

Yes, you can use pressure washer on PPF clear bra paint protection films. You can typically wash the car after 48 hours as this is the time required for the film to dry completely after the installation. However make sure that high pressure water is not used directly on the edges.

How do I wash my car before PPF?

Wash/blow dirt from the seams and openings around the headlights, grilles, fog lights, etc. to ensure a clean base for the PPF installation. After the car is washed, use a cleaning clay bar/pad/mitt or auto scrub to thoroughly clean the surface before installing the PPF.

How long does PPF take to cure?

Give PPF at least seven days to cure before washing the vehicle. If you are using a pressure washer, keep away from the film's edges. It could cause the edges to lift, reducing the protection. If you are planning to wipe the surface, make sure it's hydrated.

XPEL Ultimate Plus Paint Protection Film Aftercare

Is PPF easy to clean?

Skyfol PPF Nano paint protection film have one of the biggest advantages over their competitors to make cleaning extremely easy. The surface tension of the upper protective layer was adjusted to be water repellent.

How do you keep a PPF clean?

Standard Ongoing Maintenance for PPF/Clear Bra (15 days +):

If dirty, GENTLY use a wash mitt to clean areas. Keep a regular vehicle wash schedule. E.g. once every 2 weeks for daily drivers. Every 3-4 months apply CarPro Reload to the surface to help with ease of maintenance and water spots.

Can you wax over Xpel?

ULTIMATE Paint Protection film can be waxed and sealed just like your paint. Though XPEL Flawless Finish Paint Protection Film Sealant is still the preferred product, Any automotive wax or sealant may be used.

Can you use waterless car wash on PPF?

Any soap is fine to wash your car with, but we would recommend hand wash only. Washing your car in an automatic car wash or 'waterless' washing could result in your car being washed with dirty cloths and therefore cause damage to the PPF and it's self healing layer.

Does Xpel turn yellow?

Depending on which film you choose, you WILL notice a slight bit of yellowing no matter what brand. Out of the roll for example, XPEL is slightly yellower than Suntek. Hence why if a client is after the aesthetics, we recommend Suntek on lighter cars.

How long does Xpel take to cure?

After installation, you may see a few water or gel bubbles under the film. This is normal and will go away once the film has fully cured (up to 45 days dependent on temperature and humidity).

How long does Xpel PPF last?

How long will paint protection film last? XPEL Clear Bra Paint Protection Film can last years. Our film is covered by a 10 year warranty, but as long as you take proper care of your film, it will continue to perform year after year.

How do I wash my car after ceramic coating?

How To Wash Your Car The First Time After Applying Ceramic Coating

1. Avoid washing your car at an automatic car wash. ...
2. Hand wash the vehicle but avoid doing it under direct sunlight.
3. Clean your vehicle regularly. ...
4. Make sure you remove contaminants like bird droppings, tree sap or bug splasher immediately from the car paint.

Can you go through a car wash after ceramic coating?

The short answer is YES! You can take a ceramic coated car through a car wash but remember, not all car washes are the same. We recommend you stay away from automatic car washes that still employ abrasive brushes to clean your car.

How do I clean my Xpel Ultimate Plus?

ULTIMATE PLUS ™ Paint Protection Film

Stubborn stains can be removed with 99% isopropyl alcohol. Take care to keep these chemicals off the vehicle's paint. Seal with XPEL Ceramic Boost at least once every 6 months to preserve high gloss. Light scratches in the film will self-heal in 20-30 minutes at room temperature.

Is Xpel better than 3M?

Self-Healing Properties

XPEL Clear Brand outperforms 3M when regarding self-healing properties. Even though 3M was the first company to enter the clear paint film industry, XPEL manufactured the first-ever self-healing film, which means that a scratched surface looks new shortly, even after a scratch.

Does Xpel hide scratches?

Xpel or suntek protect paint not hide scratches. You need paint correction to remove scratches first than add xpel or suntek. The installer will usually do a paint correction process before the film is installed to remove them.

Can you use a clay bar on PPF?

You can use a fine grade clay for the ppf and just gentle pressure. The white Meguiars clay kits at auto zone/ O'Reilys, etc will be fine.

Can you polish a car with PPF?

Yes. The process is the same as with regular paint; wet the surface with a lubricant such as soapy water and then gently rub the surface with the clay bar.

What should you not do after ceramic coating?

Use only recommended mild soaps. Avoid high volume brush style car washes, and high PH detergent style cleaners. Avoid washing in direct sunlight to minimize streaking and water spotting. Wash from the top down leaving the dirtiest sections for last to avoid cross contamination.

Can PPF be waxed?

If you insist on waxing your vehicle with paint protection film even though it is not needed, you can do so as long as you pay attention to the ingredients in the wax.

How do you remove scratches from PPF?

How to Remove Scratches from Clear Bra Material (PPF)

1. Never compound PPF. ...
2. Use a SMAT based polish with little or no fillers. ...
3. Use a little bit of polish. ...
4. I'm using a GG6 here. ...
5. Follow up with a few light passes on speed 3-3.5.
6. Obviously, don't let anything get hot.
7. Don't go for 100% correction - 90% is achievable.