Follow the steps below to connect your soundbar to the TV.

1. Prepare an HDMI cable.
2. Connect the cable to the TV's HDMI IN (ARC).
3. Connect to the HDMI OUT (TV-ARC) port of the soundbar.
4. Turn on the soundbar and set the Source to D.IN.
5. The TV sound will be played through your soundbar.

How do I get my Samsung TV to recognize my soundbar?

On your TV, navigate to Home, select Settings, select Sound, select Sound Output, and then select Bluetooth Speaker List. Select your soundbar from the list. When the TV detects a nearby soundbar, the message Need Pairing or Paired will appear in the TV's Bluetooth device list.

How do I pair my Polk soundbar?

Press and hold the SYNC button on each of the surround speakers for 3 seconds. The green LED on the back of the surround speaker will start flashing at a faster rate, indicating that the sound bar and the speaker are connecting, the LED is solid green when connected.

Why won't my Samsung TV connect to my soundbar?

Reset the soundbar.

Reset the soundbar by powering it off and then pressing and holding the Play/Pause button until it displays 'INIT OK'. Power on the soundbar, and then try pairing the soundbar to your TV again.

How do I connect my Polk soundbar to my TV?

Connecting via HDMI Input

If both your soundbar and TV have the relevant connection ports, one cable is all you will need for setup. Connect one end of the HDMI cable to your TV's “HDMI Out” port and the other end into the soundbar's “HDMI In” port. Then, go to the “Settings” on your TV and enable the HDMI connection.

Polk Audio Soundbar Install On My 65 Inch Samsung TV #polkaudio #samsung

Where is sync button on Polk soundbar?

2 - Locate the “SYNC” button on the back of the bar, and Press & Hold for 5-7 sec. until you hear a chime from the bar. 3 - Press and Hold the “SYNC” button on the back of the subwoofer for 5-7 sec. until you hear a chime.

How do I connect my soundbar to my TV?

1. Connect one end of the HDMI cable (sold separately) to the HDMI IN port on your TV.
2. Connect the other end to the TV OUT (ARC) port on your sound bar.
3. Then, connect an optical audio cable from the TV's Optical digital audio out to OPTICAL IN on your sound bar (this is necessary to hear the TV audio).

Why is my Polk soundbar not working?

Your Polk MagniFi Soundbar is connected to the power but cannot be turned on. If the soundbar cannot be turned on, check the power cord connection, AC adapter, or the power on button. Troubleshoot all above options. If all of them work normally, there is a high possibility that the motherboard is broken.

Do I need HDMI ARC for soundbar?

Most TVs these days have several HDMI (High-Definition Multimedia Interface) ports. However, in order to connect a soundbar, you have to make sure your TV has an HDMI ARC (audio return channel) port.

How do I connect my Polk Signa S2 soundbar to my TV?

Connecting Your Signa S2 to Your TV

Turn on your sound bar. Press and hold the BAR SYNC button on the back of the subwoofer for 3 seconds. Simultaneously press and hold Bluetooth and VOL + buttons on the sound bar for 5 seconds.

Which HDMI port is ARC on Samsung TV?

The HDMI port will be labeled ARC on the back of the TV or One Connect Box. Most One Connect Boxes have an HDMI-ARC port (it is usually the third HDMI port).
...
Audio formats supported by HDMI ARC:

1. PCM (2 channel)
2. Dolby Digital (up to 5.1 channel)
3. DTS Digital Surround (up to 5.1 channel)

Why is my soundbar not working with my TV?

Make sure that the setting for Control for HDMI or BRAVIA Sync of your TV and audio device is set to ON. Make sure that the ARC feature of your audio device is set to ON or AUTO. Make sure that your audio device is set to the TV input. Change the TV audio output setting to PCM and check whether the sound is output.

What soundbar is compatible with Samsung Smart TV?

7 Best Soundbars for Samsung TV (2022)

• Samsung 2.1 Soundbar HW-R550 with Wireless Subwoofer.
• SONOS Beam – Smart TV Sound Bar.
• Samsung Harman Kardon HW-Q80R With Wireless Subwoofer.
• Bose SoundTouch 300 Soundbar.
• Polk Audio Signa S2 Ultra-Slim Universal TV Sound Bar with Wireless Subwoofer.

Is it better to connect soundbar with HDMI or optical?

The biggest difference is that HDMI can pass higher-resolution audio, including the formats found on streaming services such as Dolby Atmos and DTS HD Master Audio. These formats can't be transmitted across optical. In terms of simplicity, HDMI also passes video signals.

How do I connect my soundbar to my TV without ARC?

1. When you connect an external device to TV (without ARC) and Sound Bar, connect the HDMI cable (sold separately) from the external device to the TV. Then, connect the external device to the Sound bar using an optical cord (sold separately).
2. If you want to connect to just the TV, then the HDMI connection is unnecessary.

Why is the sound out of sync on my Samsung TV?

If the video on the TV and audio from the Soundbar are not synchronised, select SYNC in sound control and then set the audio delay between 0 – 300 milliseconds by using the Up/Down buttons.

How do I reset my Polk audio Soundbar?

If you experience issues with your Command Bar or the supplied remote control, it may be necessary to reset to factory defaults. To reset your device, press and hold the button "Microphone Mute" and "Volume Down" on the top of the product for at least 10 seconds. After this, all settings of the Bar are erased.

How do I connect my Bluetooth soundbar to my Samsung TV?

Connect your Soundbar through Bluetooth

1. Press the Home button on your remote control to bring up the Smart Hub and then select Settings.
2. Go to Sound Settings and select Sound Output.
3. Select the Bluetooth Speaker List.
4. Select your Bluetooth speaker and then select Pair and Connect.

Which is better HDMI or HDMI ARC?

While a regular HDMI connector is only able to transmit video images, ARC has an added function that allows you to transmit audio from a TV back to the source, like a receiver or soundbar. This means you only require 1 cable in order to transmit both video and audio signals.